Copyright (C) 1989, 1992, 1993 Free Software Foundation, Inc.

This is Edition 1.00, Febrary 1992, of The indent Manual, for Indent Version 1.7

Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies.

indent: Indent and Format C Program Source
******************************************

The indent program changes the appearance of a C program by inserting or deleting whitespace.

This is Edition 1.00, Febrary 1993, of The indent Manual, for Indent Version 1.7

The indent Program
******************

The indent program can be used to make code easier to read.  It can also convert from one style of writing C to another.

indent understands a substantial amount about the syntax of C, but it also attempts to cope with incomplete and misformed syntax.

In version 1.2 and more recent versions, the GNU style of indenting is the default.

Invoking indent
===============

As of version 1.3, the format of the indent command is:

     indent [OPTIONS] [INPUT-FILES]

     indent [OPTIONS] [SINGLE-INPUT-FILE] [-o OUTPUT-FILE]

This format is different from earlier versions and other versions of indent.

In the first form, one or more input files are specified.  indent makes a backup copy of each file, and the original file is replaced with its indented version.  See Backup files, for an explanation of how backups are made.

In the second form, only one input file is specified.  In this case, or when the standard input is used, you may specify an output file after the -o option.

To cause indent to write to standard output, use the -st option.  This is only allowed when there is only one input file, or when the standard input is used.

If no input files are named, the standard input is read for input. Also, if a filename named - is specified, then the standard input is read.

As an example, each of the following commands will input the program slithy_toves.c and write its indented text to slithy_toves.out:

     indent slithy_toves.c -o slithy_toves.out

     indent -st slithy_toves.c > slithy_toves.out

     cat slithy_toves.c | indent -o slithy_toves.out

Most other options to indent control how programs are formatted. As of version 1.2, indent also recognizes a long name for each option name.  Long options are prefixed by either -- or +. (+ is being superseded by -- to maintain consistency with the POSIX standard.) In most of this document, the traditional, short names are used for the sake of brevity. See Option Summary, for a list of options, including both long and short names.

Here is another example:

     indent -br test/metabolism.c -l85

This will indent the program test/metabolism.c using the -br and -l85 options, write the output back to test/metabolism.c, and write the original contents of test/metabolism.c to a backup file in the directory test.

Equivalent invocations using long option names for this example would be:

     indent --braces-on-if-line --line-length185 test/metabolism.c

     indent +braces-on-if-line +line-length185 test/metabolism.c

If you find that you often use indent with the same options, you may put those options into a file called .indent.pro. indent will first look for .indent.pro in the current directory and use that if found.  Otherwise, indent will search your home directory for .indent.pro and use that file if it is found.  This behaviour is different from that of other versions of indent, which load both files if they both exist.

Command line switches are handled after processing .indent.pro.  Options specified later override arguments specified earlier, with one exception: Explicitly specified options always override background options (see Common styles).  You can prevent indent from reading an .indent.pro file by specifying the -npro option.

Backup Files
============

As of version 1.3, GNU indent makes GNU--style backup files, the same way GNU Emacs does.  This means that either simple or numbered backup filenames may be made.

Simple backup file names are generated by appending a suffix to the original file name.  The default for the this suffix is the one-character string ~ (tilde).  Thus, the backup file for python.c would be python.c~.

Instead of the default, you may specify any string as a suffix by setting the environment variable SIMPLE_BACKUP_SUFFIX to your preferred suffix.

Numbered backup versions of a file momewraths look like momewraths.c.~23~, where 23 is the version of this particular backup.  When making a numbered backup of the file src/momewrath.c, the backup file will be named src/momewrath.c.~V~, where V is one greater than the highest version currently existing in the directory src.

The type of backup file made is controlled by the value of the environment variable VERSION_CONTROL.  If it is the string simple, then only simple backups will be made.  If its value is the string numbered, then numbered backups will be made.  If its value is numbered-existing, then numbered backups will be made if there already exist numbered backups for the file being indented; otherwise, a simple backup is made.  If VERSION_CONTROL is not set, then indent assumes the behaviour of numbered-existing.

Other versions of indent use the suffix .BAK in naming backup files.  This behaviour can be emulated by setting SIMPLE_BACKUP_SUFFIX to .BAK.

Note also that other versions of indent make backups in the current directory, rather than in the directory of the source file as GNU indent now does.

Common styles
=============

There are several common styles of C code, including the GNU style, the Kernighan & Ritchie style, and the original Berkeley style.  A style may be selected with a single background option, which specifies a set of values for all other options.  However, explicitly specified options always override options implied by a background option.

As of version 1.2, the default style of GNU indent is the GNU style.  Thus, it is no longer neccessary to specify the option -gnu to obtain this format, although doing so will not cause an error.  Option settings which correspond to the GNU style are:

     -nbad -bap -nbbb -nbc -bl -bli2 -c33 -cd33 -ncdb -nce
     -cli0 -cp1 -di2 -nfc1 -nfca -i2 -ip5 -lp -pcs -psl -cs
     -nsc -nsob -nss -ts8 -d0 -ci0 -l78

The GNU coding style is that preferred by the GNU project.  It is the style that the GNU Emacs C mode encourages and which is used in the C portions of GNU Emacs.  (People interested in writing programs for Project GNU should get a copy of The GNU Coding Standards, which also covers semantic and portability issues such as memory usage, the size of integers, etc.)

The Kernighan & Ritchie style is used throughout their well-known book The C Programming Language.  It is enabled with the -kr option.  The Kernighan & Ritchie style corresponds to the following set of options:

     -nbad -bap -nbbb -nbc -br -c33 -cd33 -ncdb -ce -ci4
     -cli0 -cp33 -d0 -di1 -nfc1 -nfca -i4 -ip0 -l75 -lp
     -npcs -npsl -nsc -nsob -nss -ts8 -cs

Kernighan & Ritchie style does not put comments to the right of code in the same column at all times (nor does it use only one space to the right of the code), so for this style indent has arbitrarily chosen column 33.

The style of the original Berkeley indent may be obtained by specifying -orig (or by specifyfying --original, using the long option name).  This style is equivalent to the following settings:

     -nbap -nbad -nbbb -bc -br -c33 -cd33 -cdb -ce -ci4
     -cli0 -cp33 -d4 -di16 -fc1 -fca -i4 -ip4 -l75 -lp
     -npcs -psl -sc -nsob -nss -ts8 -ncs

Blank lines
===========

Various programming styles use blank lines in different places. indent has a number of options to insert or delete blank lines in specific places.

The -bad option causes indent to force a blank line after every block of declarations.  The -nbad option causes indent not to force such blank lines.

The -bap option forces a blank line after every procedure body. The -nbap option forces no such blank line.

The -bbb option forces a blank line before every block comment. A block comment is one which starts in column one when formatting of such comments is disabled, or one with - or * immediately following the /*.  The -nbbb option does not force such blank lines.

The -sob option causes indent to swallow optional blank lines (that is, any optional blank lines present in the input will be removed from the output).  If the -nsob is specified, any blank lines present in the input file will be copied to the output file.

--blank-lines-after-declarations
--------------------------------

The -bad option forces a blank line after every block of declarations.  The -nbad option does not add any such blank lines.

For example, given the input

     char *foo;
     char *bar;
     /* This separates blocks of declarations.  */
     int baz;

indent -bad produces

     char *foo;
     char *bar;

     /* This separates blocks of declarations.  */
     int baz;

and indent -nbad produces

     char *foo;
     char *bar;
     /* This separates blocks of declarations.  */
     int baz;

--blank-lines-after-procedures
------------------------------

The -bap option forces a blank line after every procedure body.

For example, given the input

     int
     foo ()
     {
       puts("Hi");
     }
     /* The procedure bar is even less interesting.  */
     char *
     bar ()
     {
       puts("Hello");
     }

indent -bap produces

     int
     foo ()
     {
       puts ("Hi");
     }

     /* The procedure bar is even less interesting.  */
     char *
     bar ()
     {
       puts ("Hello");
     }

and indent -nbap produces

     int
     foo ()
     {
       puts ("Hi");
     }
     /* The procedure bar is even less interesting.  */
     char *
     bar ()
     {
       puts ("Hello");
     }

No blank line will be added after the procedure foo.

Comments
========

indent formats both C and C++ comments. C comments are begun with /* and terminated with */ and may contain newline characters.  C++ comments begin with the delimiter // and end at the newline.

indent handles comments differently depending upon their context.  indent attempts to distinguish amoung comments which follow statements, comments which follow declarations, comments following preprocessor directives, and comments which are not preceded by code of any sort, i.e., they begin the text of the line (although not neccessarily in column 1).

indent further attempts to leave boxed comments unmodified.  The general idea of such a comment is that it is enclosed in a rectangle or ''box'' of stars or dashes to visually set it apart. More precisely, boxed comments are defined as those in which the initial /* is followed immediately by the character *, =, _, or -, or those in which the beginning comment delimiter (/*) is on a line by itself, and the following line begins with a * in the same column as the star of the opening delimiter.

Examples of boxed comments are:

     /**********************
      * Comment in a box!! *
      **********************/

            /*
             * A different kind of scent,
             * for a different kind of comment.
             */

indent attempts to leave boxed comments exactly as they are found in the source file.  Thus the indentation of the comment is unchanged, and its length is not checked in any way.  The only alteration made is that an embedded tab character may be converted into the appropriate number of spaces.

Comments which are not boxed may be formatted, which means that the line is broken to fit within a right margin and left-filled with whitespace.  Single newlines are equivalent to a space, but blank lines (two or more newlines in a row) are taken to mean a paragraph break.  Formatting of comments which begin after the first column is enabled with the -fca option.  To format those beginning in column one, specify -fc1.  The right margin defaults to 78, but may be changed with the -l option.  Such formatting is disabled by default.

If the margin specified does not allow the comment to be printed, the margin will be automatically extended for the duration of that comment.  The margin is not respected if the comment is not being formatted.

If the comment begins a line (i.e., there is no program text to its left), it will be indented to the column it was found in unless the comment is within a block of code.  In that case, such a comment will be aligned with the indented code of that block.  This alignment may be affected by the -d option, which specifies an amount by which such comments are moved to the left, or unindented.  For example, -d2 places comments two spaces to the left of code. By default, comments are aligned with code.

Comments to the right of code will appear by default in column 33. This may be changed with one of three options.  -c will specify the column for comments following code, -cd specifies the column for comments following declarations, and -cp specifies the column for comments following preprocessor directives #else and #endif.

If the code to the left of the comment exceeds the beginning column, the comment column will be extended to the next tabstop column past the end of the code, or in the case of preprocessor directives, to one space past the end of the directive.  This extension lasts only for the output of that particular comment.

The -cdb option places the comment delimiters on blank lines. Thus, a single line comment like /* Claustrophobia */ can be transformed into:

     /*
        Claustrophobia
      */

Stars can be placed at the beginning of multi-line comments with the -sc option.  Thus, the single-line comment above can be transformed (with -cdb -sc) into:

     /*
      * Claustrophobia
      */

Statements
==========

The -br or -bl option specifies how to format braces.

The -br option formats statement braces like this:

     if (x > 0) {
       x--;
     }

The -bl option formats them like this:

     if (x > 0)
       {
         x--;
       }

These options also affect structure and enumeration declarations.  The -br option produces structure declarations like the following:

     struct Sname {
         int i;
         char chp;
     } Vname;

The default behaviour, also obtained by specifying -bl, would yield the following format for the same declaration:

     struct Sname
       {
          int i;
          char chp;
       }
     Vname;

If you use the -bl option, you may also want to specify the -bli option.  This option specifies the number of spaces by which braces are indented.  -bli2, the default, gives the result shown above.  -bli0 results in the following:

     if (x > 0)
     {
       x--;
     }

If you are using the -br option, you probably want to also use the -ce option.  This causes the else in an if-then-else construct to cuddle up to the immediately preceding }.  For example, with -br -ce you get the following:

     if (x > 0) {
       x--;
     } else {
       fprintf (stderr, "...something wrong?\n");
     }

With -br -nce that code would appear as

     if (x > 0) {
       x--;
     }
     else {
       fprintf (stderr, "...something wrong?\n");
     }

The -cli option specifies the number of spaces that case labels should be indented to the right of the containing switch statement.

If a semicolon is on the same line as a for or while statement, the -ss option will cause a space to be placed before the semicolon.  This emphasizes the semicolon, making it clear that the body of the for or while statement is an empty statement. -nss disables this feature.

The -pcs option causes a space to be placed between the name of the procedure being called and the ( (for example, puts ("Hi");.  The -npcs option would give puts("Hi");).

If the -cs option is specified, indent puts a space after a cast operator.

The -bs option ensures that there is a space between the keyword sizeof and its argument.  In some versions, this is known as the Bill_Shannon option.

Declarations
============

By default indent will line up identifiers, in the column specified by the -di option.  For example, -di16 makes things look like:

     int             foo;
     char           *bar;

Using a small value (such as one or two) for the -di option can be used to cause the indentifiers to be placed in the first available position, for example

     int foo;
     char *bar;

The value given to the -di option will still affect variables which are put on separate lines from their types, for example -di2 will lead to

     int
       foo;

If the -bc option is specified, a newline is forced after each comma in a declaration.  For example,

     int a,
       b,
       c;

With the -nbc option this would look like

     int a, b, c;

The -psl option causes the type of a procedure being defined to be placed on the line before the name of the procedure.  This style is required for the etags program to work correctly, as well as some of the c-mode functions of Emacs.

If you are not using the -di1 option to place variables being declared immediately after their type, you need to use the -T option to tell indent the name of all the typenames in your program that are defined by typedef.  -T can be specified more than once, and all names specified are used.  For example, if your program contains

     typedef unsigned long CODE_ADDR;
     typedef enum {red, blue, green} COLOR;

you would use the options -T CODE_ADDR -T COLOR.

Indentation
===========

One issue in the formatting of code is how far each line should be indented from the left margin.  When the beginning of a statement such as if or for is encountered, the indentation level is increased by the value specified by the -i option.  For example, use -i8 to specify an eight character indentation for each level.  When a statement is broken across two lines, the second line is indented by a number of additional spaces specified by the -ci option.  -ci defaults to 0.  However, if the -lp option is specified, and a line has a left parenthesis which is not closed on that line, then continuation lines will be lined up to start at the character position just after the left parenthesis.  This processing also applies to [ and applies to { when it occurs in initialization lists.  For example, a piece of continued code might look like this with -nlp -ci3 in effect:

       p1 = first_procedure (second_procedure (p2, p3),
          third_procedure (p4, p5));

With -lp in effect the code looks somewhat clearer:

       p1 = first_procedure (second_procedure (p2, p3),
                             third_procedure (p4, p5));

indent assumes that tabs are placed at regular intervals of both input and output character streams.  These intervals are by default 8 columns wide, but (as of version 1.2) may be changed by the -ts option.  Tabs are treated as the equivalent number of spaces.

The indentation of type declarations in old-style function definitions is controlled by the -ip parameter.  This is a numeric parameter specifying how many spaces to indent type declarations.  For example, the default -ip5 makes definitions look like this:

     char *
     create_world (x, y, scale)
          int x;
          int y;
          float scale;
     {
       . . .
     }

For compatibility with other versions of indent, the option -nip is provided, which is equivalent to -ip0.

ASCII C allows white space to be placed on preprocessor command lines between the character # and the command name.  By default, indent removes this space, but specifying the -lps option directs indent to leave this space unmodified.

Disabling Formatting
====================

Formatting of C code may be disabled for portions of a program by embedding special control comments in the program.  To turn off formatting for a section of a program, place the disabling control comment /* *INDENT-OFF* */ on a line by itself just before that section.  Program text scanned after this control comment is output precisely as input with no modifications until the corresponding enabling comment is scanned on a line by itself.  The disabling control comment is /* *INDENT-ON* */, and any text following the comment on the line is also output unformatted.  Formatting begins again with the input line following the enabling control comment.

More precisely, indent does not attempt to verify the closing delimiter (*/) for these C comments, and any whitespace on the line is totally transparent.

These control comments also function in their C++ formats, namely // *INDENT-OFF* and // *INDENT-ON*.

It should be noted that the internal state of indent remains unchanged over the course of the unformatted section.  Thus, for example, turning off formatting in the middle of a function and continuing it after the end of the function may lead to bizarre results.  It is therefore wise to be somewhat modular in selecting code to be left unformatted.

As a historical note, some earlier versions of indent produced error messages beginning with *INDENT**.  These versions of indent were written to ignore any input text lines which began with such error messages.  I have removed this incestuous feature from GNU indent.

Miscellaneous options
=====================

To find out what version of indent you have, use the command indent -version.  This will report the version number of indent, without doing any of the normal processing.

The -v option can be used to turn on verbose mode.  When in verbose mode, indent reports when it splits one line of input into two more more lines of output, and gives some size statistics at completion.

Bugs
====

The "-troff" option is strongly deprecated, and is not supported.  A good thing for someone to do is to rewrite `indent' to generate TeX source as a hardcopy output option, amoung other things.

Copyright
=========

The following copyright notice applies to the indent program. The copyright and copying permissions for this manual appear near the beginning of this document.

     Copyright (c) 1989, 1992 Free Software Foundation
     Copyright (c) 1985 Sun Microsystems, Inc.
     Copyright (c) 1980 The Regents of the University of California.
     Copyright (c) 1976 Board of Trustees of the University of Illinois.
     All rights reserved.

     Redistribution and use in source and binary forms are permitted
     provided that the above copyright notice and this paragraph are
     duplicated in all such forms and that any documentation,
     advertising materials, and other materials related to such
     distribution and use acknowledge that the software was developed
     by the University of California, Berkeley, the University of Illinois,
     Urbana, and Sun Microsystems, Inc.  The name of either University
     or Sun Microsystems may not be used to endorse or promote products
     derived from this software without specific prior written permission.
     THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
     IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
     WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
     PURPOSE.

Option Summary
**************

Here is a list of all the options for indent, alphabetized by short option.  It is followed by a cross key alphabetized by long option.

-bad
--blank-lines-after-declarations
     Force blank lines after the declarations.

     See Blank lines.

-bap
--blank-lines-after-procedures
     Force blank lines after procedure bodies.

     See Blank lines.

-bbb
--blank-lines-after-block-comments
     Force blank lines after block comments.

     See Blank lines.

-bc
--blank-lines-after-commas
     Force newline after comma in declaration.

     See Declarations.

-bl
--braces-after-if-line
     Put braces on line after if, etc.

     See Statements.

-bliN

--brace-indentN
     Indent braces N spaces.

     See Statements.

-br
--braces-on-if-line
     Put braces on line with if, etc. and structure declarations

     See Statements.

-cN
--comment-indentationN
     Put comments to the right of code in column N.

     See Comments.

-cdN
--declaration-comment-columnN
     Put comments to the right of the declarations in column N.

     See Comments.

-cdb
--comment-delimiters-on-blank-lines
     Put comment delimiters on blank lines.

     See Comments.

-ce
--cuddle-else
     Cuddle else and preceeding }.

     See Comments.

-ciN
--continuation-indentationN
     Continuation indent of N spaces.

     See Statements.

-cliN
--case-indentationN
     Case label indent of N spaces.

     See Statements.

-cpN

--else-endif-columnN
     Put comments to the right of #else and #endif statements in column N.

     See Comments.

-cs
--space-after-cast
     Put a space after a cast operator.

     See Statements.

-bs
--blank-before-sizeof
     Put a space between sizeof and its argument.

     See Statements

-dN
--line-comments-indentationN
     Set indentation of comments not to the right of code to N spaces.

     See Comments.

-diN
--declaration-indentationN
     Put variables in column N.

     See Declarations.

-fc1
--format-first-column-comments
     Format comments in the first column.

     See Comments.

-fca
--format-all-comments
     Do not disable all formatting of comments.

     See Comments

-gnu
--gnu-style
     Use GNU coding style.  This is the default.

     See Common styles.

-iN
--indent-levelN
     Set indentation level to N spaces.

     See Indentation.

-ipN
--parameter-indentationN
     Indent parameter types in old-style function definitions by N spaces.

     See Indentation.

-kr
--k-and-r-style
     Use Kernighan & Ritchie coding style.

     See Common styles.

-lN
--line-lengthN
     Set maximum line length to N.

     See Comments.

-lp
--continue-at-parentheses
     Line up continued lines at parentheses.

     See Indentation.

-lps
--leave-preprocessor-space
     Leave space between # and preprocessor directive. See Indentation.

-nbad
--no-blank-lines-after-declarations
     Do not force blank lines after declarations.

     See Blank lines.

-nbap
--no-blank-lines-after-procedures
     Do not force blank lines after procedure bodies.

     See Blank lines.

-nbbb
--no-blank-lines-after-block-comments
     Do not force blank-lines after block comments.

     See Blank lines.

-nbc
--no-blank-lines-after-commas
     Do not force newlines after commas in declarations.

     See Declarations.

-ncdb
--no-comment-delimiters-on-blank-lines
     Do not put comment delimiters on blank lines.

     See Comments.

-nce
--dont-cuddle-else
     Do not cuddle } and else.

     See Statements.

-ncs
--no-space-after-casts
     Do not put a space after cast operators.

     See Statements.

-nfc1
--dont-format-first-column-comments
     Do not format comments in the first column as normal.

     See Comments.

-nfca
--dont-format-comments
     Do not format any comments.

     See Comments.

-nip
--no-parameter-indentation
     Zero width indentation for parameters.

     See Indentation

-nlp
--dont-line-up-parentheses
     Do not line up parentheses.

     See Statements.

-npcs
--no-space-after-function-call-names
     Do not put space after the function in function calls.

     See Statements.

-npsl
--dont-break-procedure-type
     Put the type of a procedure on the same line as its name.

     See Declarations.

-nsc
--dont-star-comments
     Do not put the * character at the left of comments.

     See Comments.

-nsob
--leave-optional-blank-lines
     Do not swallow optional blank lines.

     See Blank lines.

-nss

--dont-space-special-semicolon
     Do not force a space before the semicolon after certain statements. Disables -ss.

     See Statements.

-nv
--no-verbosity
     Disable verbose mode. See Miscellaneous options.

-orig
--original
     Use the original Berkeley coding style.

     See Common styles.

-npro
--ignore-profile
     Do not read .indent.pro files.

     See Invoking indent.

-pcs
--space-after-procedure-calls
     Insert a space between the name of the procedure being called and the (.

     See Statements.

-psl
--procnames-start-lines
     Put the type of a procedure on the line before its name.

     See Declarations.

-sc
--start-left-side-of-comments
     Put the * character at the left of comments.

     See Comments.

-sob
--swallow-optional-blank-lines
     Swallow optional blank lines.

     See Blank lines.

-ss
--space-special-semicolon
     On one-line for and while statments, force a blank before the semicolon.

     See Statements.

-st
--standard-output
     Write to standard output.

     See Invoking indent.

-T
     Tell indent the name of typenames.

     See Declarations.

-tsN
--tab-sizeN
     Set tab size to N spaces.

     See Indentation.

-v
--verbose
     Enable verbose mode.

     See Miscellaneous options.

-version
     Output the version number of indent.

     See Miscellaneous options.

Options' Cross Key
------------------

Here is a list of options alphabetized by long option, to help you find the corresponding short option.

     --blank-lines-after-block-comments              -bbb
     --blank-lines-after-commas                      -bc
     --blank-lines-after-declarations                -bad
     --blank-lines-after-procedures                  -bap
     --braces-after-if-line                          -bl
     --brace-indent                                  -bli
     --braces-on-if-line                             -br
     --case-indentation                              -cliN
     --comment-delimiters-on-blank-lines             -cdb
     --comment-indentation                           -cN
     --continuation-indentation                      -ciN
     --continue-at-parentheses                       -lp
     --cuddle-else                                   -ce
     --declaration-comment-column                    -cdN
     --declaration-indentation                       -diN
     --dont-break-procedure-type                     -npsl
     --dont-cuddle-else                              -nce
     --dont-format-comments                          -nfca
     --dont-format-first-column-comments             -nfc1
     --dont-line-up-parentheses                      -nlp
     --dont-space-special-semicolon                  -nss
     --dont-star-comments                            -nsc
     --else-endif-column                             -cpN
     --format-all-comments                           -fca
     --format-first-column-comments                  -fc1
     --gnu-style                                     -gnu
     --ignore-profile                                -npro
     --indent-level                                  -iN
     --k-and-r-style                                 -kr
     --leave-optional-blank-lines                    -nsob
     --leave-preprocessor-space                      -lps
     --line-comments-indentation                     -dN
     --line-length                                   -lN
     --no-blank-lines-after-block-comments           -nbbb
     --no-blank-lines-after-commas                   -nbc
     --no-blank-lines-after-declarations             -nbad
     --no-blank-lines-after-procedures               -nbap
     --no-comment-delimiters-on-blank-lines          -ncdb
     --no-space-after-casts                          -ncs
     --no-parameter-indentation                      -nip
     --no-space-after-function-call-names            -npcs
     --no-verbosity                                  -nv
     --original                                      -orig
     --parameter-indentation                         -ipN
     --procnames-start-lines                         -psl
     --space-after-cast                              -cs
     --space-after-procedure-calls                   -pcs
     --space-special-semicolon                       -ss
     --standard-output                               -st
     --start-left-side-of-comments                   -sc
     --swallow-optional-blank-lines                  -sob
     --tab-size                                      -tsN
     --verbose                                       -v